Daikin RMXS-L Series Service Manual page 101

SiUS181305E
Example of DIP switch (DS2) settings on the BP unit's PCB
BP unit 1
BP unit 2
BP unit 3
DS1 ~ 4 : Factory setting is OFF.
The BP unit 1 through 3 show the first through third unit, respectively. The order of these BP units is
flexible.
The above table is only for your reference. The redundancy of addresses can be avoided when the
DIP switch settings are individually specified.
With the DIP switch settings reprogrammed, power on the outdoor unit and BP unit again. Check
for address redundancy.
Note: If an error message is displayed on the indoor unit, BP unit or outdoor unit, follow its code and
description.
Test Operation and Field Settings
DS2-1 DS2-2
OFF OFF
OFF OFF
OFF OFF
Test Operation
DS2-3 DS2-4
ON OFF
OFF ON
ON ON
92