Control Panel Menu Structure - Lochinvar EcoForce EF80 Installation, Commissioning, User And Maintenance Instructions

C P M S
ONTROL ANEL ENU TRUCTURE
BASE SCREEN : (appears during operation)
WTRHTR : No demand / Standby / burning
> > > : 1 1 8 ° C ( 1 2 5 ° C )
1
1
. view data
press: ◄►
"MONITOR" screens
One can toggle through the measured
values and status of the heater.
Pressing "ON/OFF, RESET, ENTER" briefly
will cause the display to go back to the
base menu.
When no button has been pressed for three
minutes the display will automatically go to
the BASE DISPLAY.
(This period can be set by a parameter).
2
2
. press [ON/OFF] for
± three seconds to
programme in standby mode
press: ▲
press: ▼
press: MENU
Display shows 2x20 digit
message for three seconds.
Message can be set in
parameters.
example:
Company name
City, Country
Display shows for three seconds:
- Heater type
- Time, date and day
example:
Z-FG 550 13:51
EU)
06 / 01 / 2010 Wed
After this message the display
shows for three seconds:
- Software version and
- Cascade designation
example:
Firmware : Mk 00197
Address : 0
These three messages will also
show when:
- Heater is connected to the power
- When heater is turned ON
- When heater is turned OFF
sequence:
The messages will show from
TOP to BOTTOM each for three
seconds.
US (or
52