Analogplus Detector Line; Devices That Can Be Connected To The Line Card (Analogplus) - Siemens FS20 Planning Manual

7.4 AnalogPLUS detector line

7.4.1 Devices that can be connected to the line
Card cage
FCL2005
DM113x
DMA1133
MT320A
Building Technologies
Fire Safety
card (AnalogPLUS)
The ↑ line card (AnalogPLUS) FCL2005 is a module bus card which can be used
in fire control panels with a card cage. The purpose of the line card (AnalogPLUS)
is to migrate AnalogPLUS and Synova line devices in the event of modernizations.
The diagram below shows an example overview of the line devices that can be
connected.
AI340
DJ1192
OP620A DOT1131
DO113x
DC1192
DC1192
1) 1)
SB3
DO1101-Ex
DT1101-Ex
HI62xC
2)
DS11
DF1101-Ex
Figure 32: Example overview of the line devices that can be connected to the line
card (AnalogPLUS) FCL2005
1) Collective ↑ stub
2) Collective Ex detector line
3) SynoLINE300C
Topologies
The following topologies are possible at the ↑ line card (AnalogPLUS):
● 4 ↑ loops each with a maximum of 128 AnalogPLUS line devices
● 4 stubs each with a maximum of 32 AnalogPLUS line devices
● Mixed variants possible
● Number of devices that can be addressed: max. 512
● Max. loop length 2000 m
DT113x HI32xA OH320A
AB322A DC1192 DC1192
Planning detector lines
AnalogPLUS detector line
HI32xC
AI300
OH320C
CB320A
OP320A DF1191
DF1192
ABI322A
EB322A
DC1136
DC1131
008843_v_en_--
2015-12-15
7
3)
91 | 242