Operation And Floor Repeater Display; B3Q321 Fire Brigade Operating Unit; B3R051 Parallel Display - Siemens AlgoRex CS1140 Comissioning Hardware

11

Operation and floor repeater display

11.1 B3Q... AlgoPilot operating terminal

11.2 B3Q321 fire brigade operating unit

Item Component
1 Shielding hood
2 'S3' programming switch: I bus ad-
dress
3 Shield bridge
11.3

B3R051 parallel display

Item Component
1 'N3' resistor array
2 'S1' programming switch: Device
address
3 Inscription strips
Building Technologies
Fire Safety
For operation of AlgoPilot B3Q... . –> see pages 15 –16
Preparation
Remove (refit)
Set in accordance with system documentation
Possibly fit, depending on installation site
2
S3
2
Then connect data bus and supply cable, for installation –> see document 1393.

Preparation
Remove from all but 1 device, also see description in
document 001260
Set according to system documentation, device ad-
dress is provided by order of wiring
Label according to user data and slide in
2
1
N3
S1
Then connect data bus and supply cable, for installation –> see document 1393.

Operation and floor repeater display
1
3
3
1
24
Default ex factory
Fitted
Address 0
Included in B3Q321
Default ex factory
Equipped
Address 0 (test procedure)
Not labeled
Produce yourself with DOT
Word templates (document
006516)
008726_e_en_--
06.2017
27