Interactive Detector Line; Devices That Can Be Connected To The Line Card (Interactive) - Siemens FS20 Planning Manual

7.5 Interactive detector line

7.5.1 Devices that can be connected to the line card (interactive)

Card cage
FCL2006
DM115x
DMA1153
Building Technologies
Fire Safety
The ↑ line card (interactive) FCL2006 is a module bus card which can be used in
fire control panels with a card cage. The purpose of the line card (interactive) is to
migrate interactive line devices in the event of modernizations.
The diagram below shows an example overview of the interactive line devices that
can be connected to the line card (interactive).
DOW1171
4)
DCW1151
DOT115x
DC1192
DC1192
1) 1)
SB3
DO1101-Ex
DS11
DT1101-Ex
2)
DF1101-Ex
Figure 33: Example overview of the line devices that can be connected to the line
card (interactive) FCL2006
1) Collective stub
2) Ex area
3) SynoLINE300C
4) If compatible with AlgoRex EP7 or higher
Topologies
The following topologies are possible at the ↑ line card (interactive):
● 1x loop with a maximum of 128 interactive line devices
● 1x stub with a maximum of 32 interactive line devices
● Sub-stub on ↑ loop or ↑ stub possible
● Sub-stub on sub-stub is possible
● Separate supply output for input/output modules
DJ1192
DT115x DO115x DF1191
DF1192
DC1192 DC1192
1)
Planning detector lines
Interactive detector line
3)
HI320C
OH320C
DC1157-AA
CB320A
DLO1191
DC115x DC115x
DLR11
008843_v_en_--
2015-12-15
7
93 | 242