Customer–Specific Operator Interface - Siemens SINUMERIK 840DE sl Commissioning Manual

Customer–Specific Operator Interface
10.1 Configuring the customized boot screen
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
For the ShopMill variant with PCU 50.3, you can create your own customer
image (company logo, etc.) which appears while loading the control. For this
purpose, you create an image in 256–color mode. The maximum size of the
image, for the OP010/OP010C/OP010S/OP012, is 224 x 224 pixels and, for the
OP015, 352 x 352 pixels.
For the procedure for configuring this and exchanging the boot–up image,
please refer to:
References:
/IAM/, Commissioning Manual CNC: Basic software and
HMI Advanced, SINUMERIK 840D sl/840D/840Di/810D,
IM4 Commissioning HMI Advanced
10
10-145