Siemens SINUMERIK 840DE sl Commissioning Manual page 144

9 Additional Functions
9.6 Measuring cycle support in the G code editor
PCU 50.3
9-144
Prerequisite:
During the startup of HMI Advanced, the files AEDITOR.COM and STARTUP.COM
were automatically created in the directory STANDARD_CYCLES (CST.DIR).
During the startup of ShopMill, the archive SM_CYC.ARC was loaded from
the PCU 50.3 into the NC. The COMMON.COM file was automatically copied to the
STANDARD_CYCLES directory (CST.DIR).
S
Copy the archive MCSUPP from the ARCHIVES\CYCLE_ARCHIVES\MCYC.
S
If you want to use the measurement result displays, you need to copy the
MCRESULT archive from the ARCHIVES\CYCLE_ARCHIVES\MCYC direc-
tory.
S
If the versions of the standard measuring cycles supplied with ShopMill (see
the file SIEMENSD.RTF or SIEMENSE.RTF on the software CD) deviate
from the measuring cycles of HMI Advanced (see ARCHIVES\
CYCLE_ARCHIVES\MCYC\VERSION.ARC) in the first four digits (e.g.
06.02), you must import the archive MCYCMILL from the directory AR-
CHIVES\CYCLE_ARCHIVES\MCYC.
S
In the file STANDARD_CYCLES\COMMON.COM, remove the semicolon ";"
preceding the following line:
;sc8407=aeditor.com
In the file STANDARD_CYCLES\AEDITOR.COM, remove the semicolon ";"
preceding the following lines:
;HS15=($83531,,se1)
;PRESS(HS15)
; LS("F_mess","MZ_SKL.COM",1)
;END_PRESS
This creates the link between the softkey, with which you call the measuring
cycle support, and the configuration file of this support mask.
S
In the file STANDARD_CYCLES\STARTUP.COM remove the semicolon ";"
preceding the following lines:
;HS15=($83070,,se1)
;PRESS(HS15)
; LS("Messz")
;END_PRESS
This allows you to modify the characteristics of the measuring cycle support
in the Startup operating area.
S
Restart the PCU 50.3.
S
If required, modify the characteristics for the measuring cycle support in the
"Startup" → ">" → "Measuring cycles" menu.
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
;Milling measuring cycles (horizontal softkey 7
;on the expanded softkey bar in the
;G–code editor)
© Siemens AG 2006 All Rights Reserved
11/2006
J