Remove The Bellow - Maytag 30 Series Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the front panel (See page 4-36).
4. Loosen the star head screw on the clamp
securing the rear of the bellow to the outer
tub.
Bellow Retaining
Clamp Screw

reMOve THe BeLLOW

4-37
5. Remove the bellow retaining clamp from
around the bellow.
Bellow Retaining
6. Roll the bellow off the flange of the outer tub
to remove it.
Bellow
Clamp