Part Identification Nomenclature - Mitsubishi Q Series User Manual

5 SETUP AND PROCEDURES BEFORE OPERATION

5.3 Part identification nomenclature

QD70P8
RUN
ERR.
CON2
5 - 4
(1) The following are the part names of the QD70.
AX5 AX1
AX6 AX2
AX7 AX3
AX8 AX4
QD70P8
CON1
No. Name
RUN indicator LED, ERR. indicator
1)
LED
2) Axis display LED (Axn, n: Axis No.)
External device connection
3)
connector
1) RUN indicator LED, ERR. indicator LED
2) Axis display LED
3) External device connection connector
(40 pins)
*For details, refer to "Section 3.4.2 Signal layout for
external device connection connector"
Refer to the next page.
Connector for connection of the drive unit and
mechanical system inputs.
MELSEC-Q
Details
5 - 4