Part Identification Nomenclature - Mitsubishi MELSEC-A A1SJ71AS92 User Manual

4. Part Identification Nomenclature

Indicates the name of each part of A1SJ71AS92.
No. Name
1) 17-segment LED The operation status of the A1SJ71AS92 is
2) LED display
3) MODE switch
4) SET switch
5) Terminal block
displayed as a value.
The operation status of the A1SJ71AS92 is shown
by turning ON or OFF.
This switch is used to change between the protected
operation mode and configuration mode.
RUN This turns ON when the A1SJ71AS92 is
running normally.
U ASI The AS-i circuit is sufficiently powered. This
LED refers to the AS-i line shown on digit 1.
ERR. Configuration error. This LED refers to the
AS-i line shown on digit 1.
This switch is used to set or delete the slave
address.
This is connected to the AS-i system with an AS-i
cable.
4
Details