JVC CA-UXB70 Service Manual page 33

3.4.2 Removing the cassette hanger assembly / cassette holder
(See Fig.5)
• Prior to performing the following procedure, remove the side
bracket (L) and (R).
(1) Remove the slit washer attaching the cassette hanger as-
sembly and pull out the pin.
(2) Move the cassette hanger assembly in the direction of the
arrow to release the boss of the joint c on the left rear side
and detach the cassette hanger assembly upward.
REFERENCE:
The cassette hanger assembly is detached with the cas-
sette holder.
3.4.3 Removing the pinch roller (F) and (R)
(See Fig.6 to 8)
• Prior to performing the following procedure, remove the side
bracket (L), (R), cassette hanger assembly / cassette holder.
(1) Release the tab d in the direction of the arrow and pull out
the pinch roller upward.
REFERENCE:
The above method is for removing the pinch roller (F)
and (R).
Downloaded from www.Manualslib.com manuals search engine
Cassette hanger assembly
Cassette holder
Fig.5
Pinch roller (F)
Fig.6
Tab d
Fig.7
Pinch roller (R)
Fig.8
Pin
Slit washer
Pinch roller (R)
Pinch roller (F)
Tab d
(No.MB013)1-33