JVC CA-UXB70 Service Manual page 11

3.1.5 Removing the tuner assembly
(See Fig.12)
• Prior to performing the following procedure, remove the metal
cover.
(1) Disconnect the card wire from the tuner assembly.
(2) Remove the two screws G from the rear panel on the back
of the body.
3.1.6 Removing the rear cover/ rear panel
(See Fig.13 ~ 15)
• Prior to performing the following procedure, remove the metal
cover.
Reference:
The rear panel comes off with the tuner assembly. Remove the
tuner assembly if necessary.
(1) Remove the three screws H attaching the rear cover on the
back of the body.
(2) Remove the three screws I attaching the rear panel on the
back of the body.
(3) Release the two joints d on the right and left bottom of the
rear panel.
I
I
H
Downloaded from www.Manualslib.com
Rear panel
H
Rear cover
Fig.13
manuals search engine
Rear panel
d
Rear panel
H
Card wire
G
Tuner assembly
Fig.12
Rear panel
Fig.14
d
Fig.15
(No.MB013)1-11