JVC CA-UXB70 Service Manual page 19

3.2.4 Removing the FL display
(See Fig.35 ~ 37)
• Prior to performing the following procedure, remove the front
assembly section and the LED board.
(1) Remove the four screws Y attaching the lens holder. Re-
move the lens holder, the cover sheet and the LED lens re-
spectively.
(2) Pull out the FL display from the front assembly section.
Y
Y
Cover sheet
3.2.5 Removing the headphone board
(See Fig.38)
(1) From the back of the front panel, remove the spacer setting
the wire.
(2) Remove the screw Z attaching the headphone board.
Downloaded from www.Manualslib.com
Front assembly section
Lens holder
Fig.35
manuals search engine
Y
Front assembly section
Y
LED lens
Fig.36
FL display section
Fig.37
Spacer
Headphone board
Z
Fig.38
(No.MB013)1-19