JVC CA-UXB70 Service Manual page 18

3.2.2 Removing the switch board
(See Fig.32, 33)
• Prior to performing the following procedure, remove the front
assembly section.
(1) Pull out the volume control knob on the front side of the
front assembly section.
(2) Disconnect the card wire from connector
switch board.
(3) Remove the six screws W attaching the switch board.
3.2.3 Removing the LED board
(See Fig.34)
• Prior to performing the following procedure, remove the front
assembly section.
(1) Disconnect the card wire from connector
CN552 on the LED board.
(2) Remove the six screws X attaching the LED board.
1-18 (No.MB013)
Downloaded from www.Manualslib.com
CN510
Front assembly section
Volume knob
Fig.32
CN551
manuals search engine
on the
CN510
X
and
CN551
Front assembly section
Front assembly section
LED board
W
Switch board
Fig.33
X
LED board
Switch board
Fig.34
W
CN552