JRC Handy Search NJJ-95B Instruction Manual page 99

Main unit state
The message "Turn
OFF/ON the printer" is
displayed when the
OUTPUT key is pressed.
The message "Charge
the printer's battery" is
displayed when the
OUTPUT key is pressed.
The message "No
printing paper" is
displayed when the
OUTPUT key is pressed.
The message "Printer
error" is displayed when
the OUTPUT key is
pressed.
"CF Not Available"
message appears if the
CF key is pushed
Data from the compact
flash card can not be
read
The date/time indication
has been changed to
"0s."
Continuous use warms
the casing.
Check Items and Response
• Check if the printer settings have been initialized.
→Turn OFF/ON the printer, and press the OUTPUT key again to
start printing.
• Check if the battery pack is exhausted.
→Mount a fully charged battery pack, and press the OUTPUT key
again to start printing.
• Is the printer out of paper?
→Load a new paper roll, and press the OUTPUT key again to start
printing.
• Check if the printer displays an error message.
→Eliminate the cause of the printer error according to the printer
instruction manual.
• Has the compact flash card been removed?
• Was the compact flash card inserted after turning the power on?
→ Whether or not compact flash is inserted is checked when the
power is turned on
Insert a compact flash card following section section 3.1
"Preparations for Sense Testing."
• Has the compact flash card been removed?
→ Insert a compact flash card following section 3.1 "Preparations
for Scanning."
• Is the file attempting to be read data from the NJJ-95B?
→ The NJJ-95B can not open data from the NJJ-95A. Please
check the data
Not trouble
The voltage of the internal button-type lithium battery has dropped.
The battery is rechargeable and is charged automatically when the
radar is used.Set the "date and time" according to section 2.3.7
"Date, time."
This is a normal phenomenom.
- 87 -