Data Saving In Compact Flash Memory - JRC Handy Search NJJ-95B Instruction Manual

3.6.2 Data saving in compact flash memory

Notes
Mount/remove the compact flash memory card while the power switch of this unit
●
is off.
Make sure of the insertion direction before mounting the compact flash memory card.
●
● Operation of this unit has been confirmed with compact flash CF115-512M manufactured
by IO Data. The unit may not operate with a compact flash memory card of another company,
so an IO Data compact flash memory card should be used.
Be sure to initialize the compact flash memory using this unit. If this is performed
●
using other equipment (NJJ-95B, PC etc.) the compact flash may not be recognized.
Please do not use a compact flash memory that was used with a NJJ-95A. As the
●
data format used by NJJ-95A and NJJ-95B are different, this may cause an error.
This unit can save sense testing results as data to a compact flash memory card.
There are two types of data save formats: binary format and text format.
(1) Binary format
a) Configuration
The data format in binary mode consists of the following two sections:
The header section contains information incidental to the scan test data (date, scan test
parameters, scan test data size, etc.).
The data section contains data attributes and scan test data.
Header section (ASCII data) + data section (binary data)
- 56 -