JRC Handy Search NJJ-95B Instruction Manual page 69

b) Header section
The following shows a sample configuration of the header section and explains the
items.
The control codes in the header section are as follows: [0x0D] = CR, [0x0A] = LF, and
[0x1A] = EOF.
Sample configuration of the header section:
(1)NJJ-95 B Measurement Data ###[0x0D][0x0A]
(2)Date : 31.12.06[0x0D][0x0A]
(3)Time : 23:59[0x0D][0x0A]
(4)Data # : 999[0x0D][0x0A]
(5)X Data Size : 3000[0x0D][0x0A]
(6)Y Data Size : 512[0x0D][0x0A]
(7)X Scale : Distance[0x0D][0x0A]
(8)Y Scale : 06.2[0x0D][0x0A]
(9)X Scale Adjust : +5[0x0D][0x0A]
(10)Y Scale Range: 6ns[0x0D][0x0A]
(11)MarkX 1 :
(12)MarkY 1 :
(13)MarkX n : 2997[0x0D][0x0A]
(14)MarkY n : 508[0x0D][0x0A]
(15)END[0x0D][0x0A]
(16)[0x1A] [0x0D][0x0A]
Items in the header section:
(1)ID data such as the model name
(2)Date
(3)Time
(4)Data No.: 000 to 999
(5)Number of lines: 1 to 3000
(6)Number points per line: 512 (fixed value)
(7)Scan test system: "Distance" for distance feed, and "Time" for time feed
(8)Depth calibration value: 06.0 to 11.0, or ns
(9)Distance error compensation value: -20 to +0 to +20
(10)Shows the display range when saving: shallow
= 4ns, standard = 6 ns, deep = 8 ns
(11) X coordinate of the 1st cursor marker: Shown by line No.
(12) Y coordinate of the 1st cursor marker: Shows the point No.
(13) X coordinate of the n-th cursor marker: Max. n = 7
3[0x0D][0x0A]
14[0x0D][0x0A]
- 57 -