JRC Handy Search NJJ-95B Instruction Manual page 43

a) Mounting the battery pack (See Figure 3-2.)
1. Confirm that the 16 power switch is set to "OFF."
2. Open the battery cover 2 at the top of this unit, confirm the direction of the battery pack and
put it into the battery holder.
3. Push the battery pack forward to connect with the terminals, and close the battery cover 2.
b) Dismounting the battery pack (See Figure 3-3.)
1. Confirm that the 16 power switch is set to "OFF."
2. Open the battery cover 2 at the top of this radar, and slide the battery pack backward.
3. Push down the rear of the battery pack to raise its front, so it can be easily dismounted.
Figure 3-2 Mounting the battery pack
Remarks
• When opening the battery cover, hold onto the handle with your left hand, push up on battery
cover lock with your middle finger, open the battery cover slightly and lift the battery cover with
your right hand to easily remove the battery cover.
c) Mounting the AC adapter
1. Confirm that the 16 power switch is set to "OFF."
2. Connect the AC cable to the AC power connector on the AC adapter.
3. Open the AC adapter input connector cover 18 at the rear, and connect the DC jack of the AC
adapter.
4. Connect the AC adapter cable to the socket outlet.
Figure 3-3 Removing the battery pack
- 31 -