JRC Handy Search NJJ-95B Instruction Manual page 67

Remarks Remarks
• For details on the printer, see the printer instruction manual. • For details on the printer, see the printer instruction manual.
• To stop in the middle of printing, press any key. • To stop in the middle of printing, press any key.
• The printing range is from 0 m (0 s) up to the currently displayed screen contents. To print all • The printing range is from 0 m (0 s) up to the currently displayed screen contents. To print all
the scan test data, scroll to the last scan test screen using the cursor keys the scan test data, scroll to the last scan test screen using the cursor keys
start printing. start printing.
• The direction of printed image data changes depending on the setting of the screen inversion • The direction of printed image data changes depending on the setting of the screen inversion
function. For the printer to always output image data in the same direction, retain the same function. For the printer to always output image data in the same direction, retain the same
setting "Normal or Reverse" for "Inversion of the screen." setting "Normal or Reverse" for "Inversion of the screen."
See section 2.3.2 "Inverting the Screen" regarding inverting of the screen. See section 2.3.2 "Inverting the Screen" regarding inverting of the screen.
• As the voltage of the printer's battery pack lowers, the printing speed decreases. Replace the • As the voltage of the printer's battery pack lowers, the printing speed decreases. Replace the
battery pack as soon as a sign of a voltage drop is detected. battery pack as soon as a sign of a voltage drop is detected.
• When the message "Charge the printer's battery" is displayed on the screen, the voltage of the • When the message "Charge the printer's battery" is displayed on the screen, the voltage of the
printer's battery pack has lowered. printer's battery pack has lowered.
In this case, charge the battery pack or change to a new battery pack according to the In this case, charge the battery pack or change to a new battery pack according to the
message, and press the 13 OUTPUT key again to start printing. message, and press the 13 OUTPUT key again to start printing.
• If pressing the 13 OUTPUT key does not start printing and the message "Turn OFF/ON the • If pressing the 13 OUTPUT key does not start printing and the message "Turn OFF/ON the
printer" is displayed, the printer settings may have been initialized. (The system may take printer" is displayed, the printer settings may have been initialized. (The system may take
about 30 seconds to display this message after the 13 OUTPUT key is pressed.) about 30 seconds to display this message after the 13 OUTPUT key is pressed.)
In this case, turn OFF/ON the printer according to the message. The printer will be set again In this case, turn OFF/ON the printer according to the message. The printer will be set again
and get ready for printing. Press the 13 OUTPUT key again to start printing. and get ready for printing. Press the 13 OUTPUT key again to start printing.
• When the message "No printing paper" is displayed on the screen, the printer has run out of • When the message "No printing paper" is displayed on the screen, the printer has run out of
paper. paper.
In this case, load a new roll of printing paper, and press the 13 OUTPUT key again to start In this case, load a new roll of printing paper, and press the 13 OUTPUT key again to start
printing. printing.
- 55 - - 55 -
, and then , and then