Scan Test Screen Example (Not During Testing) - JRC Handy Search NJJ-95B Instruction Manual

2.2.2 Scan test screen example (not during testing)

An example of a scan test screen (not during scanning) is shown in Fig. 2-5
(1)Depth calibration value
(2)Calibration method
(3) Depth gauge
(4)Cursor
(5) Sensitivity display
(1) Depth calibration value
Displays the depth calibration value set at the parameter settings screen.
The method for setting the depth calibration value can be found in section 2.3.6 "Depth
Calibration".
(2) Calibration method
Displays the calibration method set using the parameter settings screen.
Distance feed system displays "m" and time feed system displays "s".
The method for setting the calibration method can be found in section 2.3.5 "Calibration
Method".
Depth gauge
(3)
Displays a scanning depth gauge.
The scanning depth gauge changes based on the depth calibration value.
(6)Antenna Mark
Fig. 2-5 Sensing test screen example (not during sensing)
- 16 -
(7)Cursor Coordinates
(8) Distance moved gauge
(9)Battery capacity display
(10)Display range
(11)Cursor mark coordinates
(12)Image processing display
(13)External output display