JRC Handy Search NJJ-95B Instruction Manual page 44

d) Dismounting the AC adapter
1. Confirm that the power switch 16 is set to "OFF," and disconnect the AC adapter cable from
the socket outlet.
2. Pull out the AC adapter DC jack from this unit and close the connector cover for the 18 AC
adapter input.
3)Mounting/dismounting a compact flash memory card
This radar can save scan test data by using a compact flash memory card.
To save scan test data, mount the compact flash memory card according the procedure
in Figure 3-4 while the radar power switch is off.
To dismount the compact flash memory card, perform the procedure in Figure 3-5 while
the radar power switch is off.
Notes
Mount/remove the compact flash memory card while the power switch of this unit
●
is off.
Make sure of the insertion direction before mounting the compact flash memory card.
●
● Operation of this unit has been confirmed with compact flash CF115-512M
manufactured by IO Data. The unit may not operate with a compact flash memory
card of another company, so an IO Data compact flash memory card should be
used.
Be sure to initialize the compact flash memory using this unit. If this is performed
●
using other equipment (NJJ-95B, PC etc.) the compact flash may not be recognized.
Please do not use a compact flash memory that was used with a NJJ-95A. As the
●
data format used by NJJ-95A and NJJ-95B are different, this may cause an error.
- 32 -