Scanning Test Preparation - JRC Handy Search NJJ-95B Instruction Manual

3.1 Scanning Preparation
(1) Mounting the hand strap
A hand strap for drop prevention is provided as standard with this radar. Mount the hand strap on
the handle of the radar as shown in Figure 3-1, put your hand through the hand strap to grip the
handle, and start sense testing.
(2) Connecting the power source (battery pack)
This radar can be operated with the battery pack or 100 VAC power when an optional AC adapter
is used.
Notes
● Use this radar in a place where the ambient temperature is 0 to 50 °C and the humidity is
45 to 80%.
● Do not move the radar in cold condition to a place where it is subject to sharp temperature
rise. Doing so generates condensation inside the radar that could cause a breakdown.
● Confirm that the power switch 16 is set to "OFF" before mounting/dismounting the
battery pack or the AC adapter.
Figure 3-1 Hand Strap
- 30 -