JRC Handy Search NJJ-95B Instruction Manual page 29

(4) Cursor
Indicates a cursor mark on the scanning test screen and is a "criss-cross" cursor that is
used to designate A mode waveform display points in B mode and for scrolling the
sensing test screen.
Sensitivity display
(5)
Shows the scanning sensitivity setting.
See section 3.3.2 "Switching Sensitivity" for the method used to switch sensitivity.
(6) Cursor mark
A mark that shows an arbitrary point on the scanning test screen.
See section 3.3.3 "Cursor Operation" for how to display, erase the cursor mark.
Cursor Coordinates
(7)
Shows the coordinates of the cross point of the cursor in item (4).
The distance moved is shown in "X" and depth in "Y".
Distance gauge
(8)
Distance gauge in the direction the scanning was performed.
Displays the distance the main unit has moved.
Battery capacity display
(9)
Shows the general amount of capacity remaining in the battery pack that is being used.
(10) Display range
Shows the display range set using the parameter settings screen.
See section 2.3.11 "Display Range" for the method used to set the display range.
(11) Cursor mark coordinates
Displays the coordinates of the cursor mark in item (6).
Below each of the mark numbers, the movement distance (X) is shown in the first row
and the depth (Y) is shown in the second row.
(12) Image processing display
Displays the image processed items for processing performed on the test results.
See section 3.4 "Image Processing" for how to process images.
- 17 -