Table of Contents
Advertisement
This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
The Model G0701 is a
heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power
move the shipping crate
and remove the machine
from the crate.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model G0701 (Mfd. Since 9/17)
SECTION 3: SETUP
machine
presents
injury
hazards
equipment
to
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this machine.
Description
•
Hex Wrench 5mm ....................................... 1
•
Hex Wrench 6mm ....................................... 1
•
Open-End Wrench 17mm ........................... 1
•
Open-End Wrench or Socket 19mm .......... 1
•
Phillips Head Screwdriver #2 ..................... 1
•
Machinist's Square ..................................... 1
•
3' Straightedge ........................................... 1
•
Finely Incremented Ruler ........................... 1
•
Safety Glasses (for each person) ........1 Pair
•
Solvent/Cleaner (Page 47) ......................... 1
•
Shop Rags .................................. As Needed
•
Lifting Straps (Rated for at least 1000 lbs.) 2
•
Lifting Equipment
(Rated for at least 1000 lbs.) ...................... 1
Unpacking
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Qty
-13-
Advertisement
Table of Contents
