Table of Contents
Advertisement
This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this machine.
Description
•
Disposable Rags ........................ As Needed
•
Cleaner/Degreaser ..................... As Needed
•
Safety Glasses (for each person) ..........1 Pr.
•
Disposable Gloves ..................... As Needed
•
Lifting Straps (Rated for 1100 lbs.) ............. 4
•
Lifting Equipment (Rated for 1100 lbs.) ...... 1
•
Open-End Wrenches 19mm ....................... 2
•
Wrench or Socket 13mm ............................ 1
•
Wrenches or Sockets 10mm ...................... 2
•
Hex Wrenches 4, 6mm .........................1 Ea.
•
NEMA Plug 6-20 ......................................... 1
Unpacking
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
-14-
SECTION 3: SETUP
machine
presents
injury
hazards
Qty
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 9)
A. Splash Guard ............................................. 1
B. Work Stop Rod ........................................... 1
C. Work Stop Arm ........................................... 1
D. Work Stop ................................................... 1
E. Hex Bolts M12-1.75 x 50 ............................. 4
F.
Hex Nuts M12-1.75 ..................................... 4
A
Figure 9. Loose inventory.
NOTICE
If you cannot find item on list, check around/
inside machine and packaging materials.
Often, these items get lost in packaging
while unpacking or they are pre-installed.
Model G0592 (Mfd. Since 01/23)
Qty
B
C
D
E
F
Advertisement
Table of Contents
