Function - Canon D1300 Series Service Manual

FUNCTION

FEEDER > FUNCTION
MTR-ON Operation check of ADF Motor
Details To start operation check of ADF Motor (M702).
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
FEED-ON Operation check of ADF individual feed
Details To start operation check of the ADF individual feed in the mode
specified by FEED-CHK.
Use case At operation check
Adj/set/operate method Select the item, and then press OK key.
Related service mode FEEDER> FUNCTION> FEED-CHK
FEED-CHK Setting of ADF individual feed mode
Details To set the ADF feed mode.
Feed operation is activated in the specified feed mode by executing
FEED-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0: 1-sided, 1: 2-sided
Default value 0
Related service mode FEEDER> FUNCTION> FEED-ON
8
Service Mode > FEEDER > FUNCTION
T-8-26
8 Service Mode > FEEDER > FUNCTION
8-23
8-23