User; Acc; Serial - Canon D1300 Series Service Manual

COPIER > OPTION > BODY
SLPMODE Setting of shift to sleep mode
Details To restrict shift to sleep mode 1/sleep mode 3.
When 1 is set, the machine does not shift to sleep mode.
Use case When sleep failure occurs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Shift is available., 1: Shift is not available.
Default value 0
SDTM-DSP Automatic shutdown setting
Details To set whether to display "Auto Shutdown Time" in the menu.
Use case For customization
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Automatic shutdown function is enabled only when there is no fax
connection and the controller which supports the function is connected.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Europe (model without fax): 1, Others: 0
Related user mode Menu > Timer Settings > Auto Shutdown Time

■ USER

COPIER > OPTION > ACC
PS-MODE Compatible mode setting at PS usage
Details To set for compatibility with existing machine regarding image
process or print specification with PS print.
Depending on a setting value, it means that multiple settings are
combined. (Example: 44 = 4 + 8 + 32)
Use case At replacement
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 63
1: not use
2: not use
4: PS duplex feed
8: Change default value of Stroke Adjust
16: Change default value of Extra long paper
32: Change horizontal line printing precision of small text
Default value 0
8
Service Mode > COPIER > OPTION > SERIAL
T-8-16
T-8-17
8 Service Mode > COPIER > OPTION > SERIAL

■ ACC

COPIER > OPTION > ACC
WLANMODE Setting of IEEE802.11n
Details To set whether to enable IEEE802.11n which is the wireless LAN
standard.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0 (Europe, Middle East, Africa), 1 (Others)
Caution In Russia and Ukraine, do not change the setting value because
setting it to 1 conflicts with the regulation.

■ SERIAL

COPIER > OPTION > SERIAL
SN-MAIN Entry of serial number
Details To write the serial number of this machine in the Main Controller
PCB.
When this item is executed, the 8-digit alphanumeric entered in
System Settings > Device Information > Location in user mode is
written in the Main Controller PCB.
When replacing the Main Controller PCB, be sure to write the serial
number in the new PBC to prepare for trouble since the serial
number of the device is not succeeded.
Use case When replacing the Main Controller PCB
Adj/set/operate method 1) Write down the current data in System Settings > Device
Information > Location in user mode.
2) Replace the Main Controller PCB after turning OFF the main
power switch.
3) Enter the serial number (8-digit alphanumeric) in "Location" of step
1.
4) Select SN-MAIN, and then press OK key to write in the Main
Controller PCB.
After writing, the serial number entered in step 3 is deleted.
5) Turn OFF/ON the main power switch.
6) Output the spec report from COPIER> FUNCTION> MISC-P>
SPEC to check the serial number (Body No.).
7) Enter the data backed up in step 1 in "Location".
Caution Since the above "Location" is only temporarily used to store data,
back up the data before input and enter it again after writing is
completed.
Related service mode COPIER> FUNCTION> MISC-P> DHALF
Related user mode System Settings > Device Information> Location
8-18
T-8-18
T-8-19
8-18