Removing The Duplex Reverse Solenoid - Canon D1300 Series Service Manual

4
Disassembly/Assembly > Controller System > Removing the Duplex Reverse Solenoid
2) Remove the Harness from the [E], and Remove the Main Fan [1].
• 2 Screws [2]
[E]
x2
3) Remove the Duplex Drive Unit [1].
• 3 Screws [2]
[2]
x3
CAUTION :
Since the Gear of the Duplex Drive Unit is Not Fixed, be Careful Not to Drop or Lose it
When Removing it.
4 Disassembly/Assembly > Controller System > Removing the Duplex Reverse Solenoid
[2]
[1]
F-4-141
[1]
[2]
F-4-142

Removing the Duplex Reverse Solenoid

Preparations
1) Removing the Right Cover Unit.
2) Removing the Right Rear Cover.
3) Removing the Left Cover Unit.
4) Removing the Controller Cover.
5) Removing the Left Rear Cover.
6) Removing the Upper Cover.
7) Removing the Duplex Drive Unit.
Procedure
1) Remove the Duplex Reverse Solenoid [1].
• 1 Screw [2]
4-56
[1] [2]
F-4-143
4-56