Reverse Solenoid; Before Removing The Reversal Solenoid; Removing The Reversal Solenoid - Canon iR C1020 Series Service Manual

Chapter 9
2) Remove the reversal motor [1].
- 2 screws [2]

9.5.12 Reverse Solenoid

9.5.12.1 Before Removing the Reversal Solenoid

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-6)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-8)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]
7) Remove the Upper Frame Unit.(page 11-18)Reference [Removing the
Upper Frame Unit]
8) Remove the Reversal Unit.(page 9-26)Reference [Removing the Re-
versal Unit]

9.5.12.2 Removing the Reversal Solenoid

1) Remove the screw [1] to move the harness guide [2] in the direction of the
arrow.
9-28
[2]
[1]
F-9-75
[1]
F-9-76
[1]
2) Disconnect the connector [1] and free the harness [2] from the guide [3].
3) Remove the reversal solenoid unit [4].
- 1 screw [5]
- 1 solenoid pin [6]
- 1 solenoid arm [7]
[2]
0019-5832
[3]
0019-5834
4) Remove the reversal solenoid [2] from the fixing plate [1].
- 1 screw [3]
[2]
F-9-77
[6]
[1]
[2] [5] [4]
F-9-78
[2]
[7]