Figure 28: The Wireless > Security Screen; Table 26: The Wireless > Security Screen - Hitron CVE-30360 User Manual

HITRON CVE-30360 USER'S GUIDE
FIGURE 28: The Wireless > Security Screen
The following table describes the labels in this screen.
TABLE 26: The Wireless > Security Screen
Wireless Security
SSID
Security Mode
Select the SSID for which you want to configure
security.
NOTE: At the time of writing, only one SSID is available.
Select the type of security that you want to use.

Select None to use no security. Anyone in the
coverage area can enter your network.

Select WEP to use the Wired Equivalent Privacy
security protocol.

Select WPA-Personal to use the WiFi Protected
Access (Personal) security protocol.
NOTE: Due to inherent security vulnerabilities, it is
suggested that you use WEP only if it is the only
security protocol your wireless clients support.
Under almost all circumstances, you should use
WPA-Personal.
79
WIRELESS