Figure 2: Hardware Connections - Hitron CVE-30360 User Manual

HITRON CVE-30360 USER'S GUIDE
FIGURE 2: Hardware Connections
TABLE 1: Hardware Connections
WIFI
Reset
USB
Use this button to turn the wireless network on or off,
and to begin the WiFi Protected Setup (WPS) Push-
Button Configuration (PBC) procedure (see
page 75 for more information.)

To turn the wireless network on or off, press the
button for between one and five seconds.

To begin the WPS PBC connection procedure, press
and hold the button for between five and ten
seconds. Press the PBC button on your wireless
clients in the coverage area within two minutes to
enable them to join the wireless network.
Use this button to reboot or reset your CVE-30360.

Press the button and hold it for less than five
seconds to reboot the CVE-30360. The CVE-30360
restarts, using your existing settings.

Press the button and hold it for more than ten
seconds to delete all user-configured settings and
restart the CVE-30360 using its factory default
settings.
Insert USB disk to share files.
WPS on
INTRODUCTION
17