Advanced Wireless Networking; Advanced Wireless Security - Hitron CVE-30360 User Manual

Up to 400mbps

Hide thumbs Also See for CVE-30360:

Quick start manual (4 pages)

Quick start manual (2 pages)

Table Of Contents

Table of Contents

Interference from physical objects

Radio Frequency (RF) interference

To minimize interference from physical objects:



Move the CVE-30360 away from walls, heavy furniture, other massive or

metallic objects like refrigerators, and so forth.



Install the CVE-30360 in a higher location.

To minimize RF interference:



Move the CVE-30360 away from sources of RF energy such as wireless

telephone base stations, microwaves, and so forth.



Conduct a wireless site audit to see if other wireless networks are interfering with

yours. If so, you can change the wireless channel to one that isn't so congested.

To conduct a site audit on the CVE-30360, go to the Wireless > WiFi Site

Survey screen. Click Scan. The screen that displays shows the wireless

networks in the area, the Ch field shows the channel they are using, and the

Signal (%) field shows how strongly the CVE-30360 is receiving their signal

(bear in mind that the strength of a network at the CVE-30360's location is not

necessarily the same as at your wireless client's location; it may be much

stronger there).

If there are a lot of networks or a very strong network using a single channel or a

group of channels, you can change the CVE-30360's channel to one further

away from the congested channel. To do this on the CVE-30360, go to the

Wireless > Basic screen and choose an option from the Channel list. You

should choose a channel as far away from the congested area as possible;

ideally a difference of five channels is desirable.

Depending on their configuration, you may also then need to change the channel

on your wireless client devices.

6.3