The Mac Filtering Screen - Hitron CVE-30360 User Manual

50
The following table describes the labels in this screen.
TABLE 14:
Intrusion Detection
System
Ping on WAN Interface
Enable DMZ Host
Connected Computers
[...] IP Address [...]
Apply
Cancel
Help
4.3

THE MAC FILTERING SCREEN

Use this screen to configure Media Access Control (MAC) address filtering on the
LAN.
NOTE: To configure MAC address filtering on the wireless network, see The Access
Control Screen on page 82.
You can set the CVE-30360 to allow only certain devices to access the CVE-30360
and the network, or to deny certain devices access.
NOTE: To see a list of all the computers connected to the CVE-30360 on the LAN,
click the Connected Computers button in the Firewall > IP Filtering,
Forwarding, Port Triggering or Firewall Options screens.
Click Firewall > MAC Filtering. The following screen displays.
FIREWALL
The Firewall > Firewall Options Screen

Select this to turn the intrusion detection system off.

Deselect this to turn the intrusion detection system
on.

Select this to prevent responses to ICMP requests
originating from the WAN.

Select this to allow responses to ICMP requests
originating from the WAN.
Use this field to turn the DMZ on or off.

Select the checkbox to enable the DMZ.

Deselect the checkbox to disable the DMZ.
Computers that were previously in the DMZ are now
on the LAN.
Click this to see a list of the computers currently
connected to the CVE-30360 on the LAN.
Enter the IP address of the computer that you want to
add to the DMZ.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
HITRON CVE-30360 USER'S GUIDE