Figure 27: Wps Pin; Table 25: The Wireless > Basic Screen - Hitron CVE-30360 User Manual

HITRON CVE-30360 USER'S GUIDE
The following table describes the labels in this screen.
TABLE 25: The Wireless > Basic Screen
Wireless Basic Settings
Wireless ON/OFF
Wireless Mode
Channel
Run WPS
Use this field to turn the wireless network on or off.

Select ENABLE to turn the wireless network on.

Deselect DISABLE to turn the wireless network off.
Select the type of wireless network that you want to use:

11B/G Mixed: use IEEE 802.11b and 802.11n

11B Only: use IEEE 802.11b

11G Only: use IEEE 802.11g

11N Only: use IEEE 802.11n

11G/N Mixed: use IEEE 802.11g and 802.11N

11B/G/N Mixed: use IEEE 802.11b, 802.11g and
802.11N
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network. If in doubt, use 11B/G/N (default).
Select the wireless channel that you want to use, or
select Auto to have the CVE-30360 select the optimum
channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
Use these buttons to run Wifi Protected Setup (WPS):

Click the PBC button to begin the Push-Button
Configuration process. You must then press the PBC
button on your client wireless devices within two
minutes in order to register them on your wireless
network.

Click the PIN button to begin the PIN configuration
process. In the screen that displays, enter the WPS
PIN that you want to use for the CVE-30360, or the
WPS PIN of the client device you want to add to the
network.
FIGURE 27: WPS PIN
77
WIRELESS