Hitron CGNM-3552-ROG Quick Start Manual

QUICK START GUIDE

HITRON
CGNM-3552-ROG

Connect to the network

Set up your wireless network
Connect to the cable outlet
STEP
Use the coaxial (not included) to connect the device's CABLE
2
connector to the cable outlet.
Connect to an Ethernet-equipped device (optional)
STEP
Use the Ethernet cable provided to connect one of the LAN ports
4
to an Ethernet-equipped device.
Connect options
Wireless
Devices
Power Adaptor
Check the box contents
STEP
1
Read me
first!
Connect to the power outlet
STEP
3
Connect with wireless devices (optional)
STEP
5
User configuration
STEP
6
Computer
Cable
1 CGNM-3552-ROG
Use the power cord provided to connect the POWER port to power
outlet.
You can connect your wireless devices with the correct SSID
and Passphrase. If you have not changed them, the default
values are indicated on the sticker on the rear of the unit.
Your gateway has a configuration interface allowing complete
control over the device's behavior. In a Web browser, enter
192.168.0.1 in the address bar. In the screen that displays, enter
cusadmin as the username and password as the password.
1 POWER ADAPTOR
QUICK START GUIDE
2.4GHz
SSID:XXXXXXXXXXXX
PassPhrase:XXXXXXXXXXXX
5GHz
SSID:XXXXXXXXXXXX
PassPhrase:XXXXXXXXXXXX