The Port Triggering Screen; Table 19: The Firewall > Forwarding > Add/Edit Screen - Hitron CVE-30360 User Manual

HITRON CVE-30360 USER'S GUIDE
TABLE 19: The Firewall > Forwarding > Add/Edit Screen
Protocol
IP Address
Connected Computers
Back
Apply
Cancel
Help
4.6

THE PORT TRIGGERING SCREEN

Use this screen to configure port triggering. You can turn port triggering on or off and
configure new and existing port triggering rules.
Click Firewall > Port Triggering. The following screen displays.
Use this field to specify whether the CVE-30360 should
forward traffic via:

Transmission Control Protocol (TCP)

User Datagram Protocol (UDP)

Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)

Generic Routing Encapsulation (GRE)

Encapsulating Security Protocol (ESP)
NOTE: If in doubt, leave this field at its default (TCP/
UDP).
Use this field to enter the IP address of the computer on
the LAN to which you want to forward the traffic.
Click this to see a list of the computers currently
connected to the CVE-30360 on the LAN.
Click this to return to the Firewall > Forwarding screen
without saving your changes to the port forwarding rule.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
59
FIREWALL