The Security Screen - Hitron CVE-30360 User Manual

78
TABLE 25:
SSID Setting
SSID Name
Hidden
In Service
WMM Mode
6.4.2
Use this screen to configure authentication and encryption on your wireless network.
NOTE: It is strongly recommended that you set up security on your network;
otherwise, anyone in the radio coverage area can access your network.
Click Wireless > Security. The following screen displays.
WIRELESS
The Wireless > Basic Screen (continued)
This displays Primary SSID.
NOTE:
Enter the name that you want to use for your wireless
network. This is the name that identifies your network,
and to which wireless clients connect.
NOTE:
Use this field to make your network visible or invisible to
other wireless devices.


This field controls whether or not the SSID is in
operation.
NOTE:
Select the checkbox if you want to apply Wifi MultiMedia
(WMM) Quality of Service (QoS) settings to this SSID.

THE SECURITY SCREEN

HITRON CVE-30360 USER'S GUIDE
You may have additional BSSIDs, depending on
your contract with your service provider.
It is suggested that you change the SSID from its
default, for security reasons.
Select the checkbox if you do not want the CVE-
30360 to broadcast the network name (SSID) to all
wireless devices in the coverage area. Anyone who
wants to connect to the network must know the
SSID.
Deselect the checkbox if you want your network
name (SSID) to be public. Anyone with a wireless
device in the coverage area can discover the SSID,
and attempt to connect to the network.
At the time of writing, this field is not user-
configurable.