Leds; Table 1: Hardware Connections - Hitron CVE-30360 User Manual

18
TABLE 1:
LAN1
LAN2
LAN3
LAN4
LINE 1
LINE 2
CABLE
POWER
ON/OFF
1.3

LEDS

This section describes the CVE-30360's LEDs (lights).
INTRODUCTION
Hardware Connections
Use these ports to connect your computers and other
network devices, using Category 5 or 6 Ethernet cables
with RJ45 connectors.
Use these ports to connect your analog phones for VoIP
services, using cables with RJ11 connectors.
Use this to connect to the Internet via an F-type RF
cable.
Use this to connect to the 12v/2A power adapter that
came with your CVE-30360.

Use this button to turn your CVE-30360 on or off.

To turn the CVE-30360 on, press and hold the ON/
OFF button for less than 1 second.

To turn the CVE-30360 off, press and hold the ON/
OFF button for 1~2 seconds.
HITRON CVE-30360 USER'S GUIDE
NEVER use another power adapter with
your CVE-30360. Doing so could harm
your CVE-30360.