Table of Contents
Advertisement
EQN2200
4.7.1 Event
The settings relating to event occurrences such as settings for motion,
alarms
and
time mask can be configured on this page.
The "Event" page has 4 tabs: [Event] tab, [Motion] tab, [Alarm] tab and [Time
Mask] tab.
Press
button to add an event condition.
To modify the event list, click on the event and it will be highlighted. Press
button to modify the setting.
To remove an event from event list, click on the event and it will be highlighted.
Press
button to remove the event.
Check Enable checkbox to activate event actions when the event occurs in the
specified time zone.
To change the priority of events, click on the event and it will be highlighted. Press
30
Advertisement
Table of Contents
