EverFocus EQN22 Series User Manual page 11

~ ○ Play Audio/Transmit Audio
○
9 10
Click the "Play Audio" and "Transmit Audio" buttons to switch the sound off and on
for the audio input and output, respectively.
Manual Control – Trigger Event
○
11
Press "Trigger Event" button to trigger an event directly from the live view page, and
event actions will be initiated if they have been set up in the "Event" menu. (Please
refer to "Section 4.7.1 Event")
Manual Control – Reset Alarm
○
12
Press "Reset Alarm" button to reset an alarm condition remotely.
Status Display
○
13
The name of the camera currently being viewed, current date/time and current frame
rate will be displayed.
Event signals
○
14
When an alarm or motion event is triggered, a signal icon will flash to alert the user.
The first icon is for alarm events and the other 5 icons are for motion events. The
motion event icons, which differ by color, correspond to the motion trigger areas set
in the Motion menu. Please refer to "Section 4.7.2 Motion" for detailed information
about Motion setup.
Alarm
Motion
11
EQN2200