Download Print this page
EverFocus ED Series User's Manual And Operation Instructions
EverFocus ED Series User's Manual And Operation Instructions

EverFocus ED Series User's Manual And Operation Instructions

High resolution dome camera series

Advertisement

Quick Links

ED Series
User's Manual
and
Operation Instructions
Version 1.1

Advertisement

loading

Summary of Contents for EverFocus ED Series

  • Page 1 ED Series User’s Manual Operation Instructions Version 1.1...
  • Page 2 Notice This manual is presented to the users of ED series by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared all efforts to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice.
  • Page 3: Table Of Contents

    Table of Contents Safety Warning .................1 Introduction ................3 Specification ................4 Major Parts Names and Functions .........5 Installation Instructions ............7 Lens Adjustments ..............8 Adjustments ................9...
  • Page 4: Safety Warning

    Safety Warning 1. Do not expose the camera to humidity and dust. Moisture can damage the camera and cause the danger of electric shock. If the camera is mounted outdoors, a camera housing is required. Do not install the camera at where there is greasy smoke or steam, where the humidity is too high, or where there is a lot of dust to prevent damages to the camera.
  • Page 5 5. Do not install the camera in the high temperature environment. Installed the camera away from stoves, or other heat generating devices, or where it could be subject to direct sunlight as the high temperatures could cause deformation, discoloration or other damages of the camera.
  • Page 6: Introduction

    Introduction The High Resolution Dome Camera Series are compact, full functioned CCD Color Cameras. Their stylish appearance can be applied as per installer's ideal locations on the ceiling. The dome camera designed with advanced digital processing curcuitry for high resolution 1/3" color interline transfer CCD sensor, it has DIP switch for AGC on/off, BLC on/off.
  • Page 7: Specification

    Specification ED Series EQ350HQ Pickup device: 1/3" Interline transfer Color CCD Video format: NTSC/PAL Scanning system: NTSC: 525 TV lines, 60 fields/sec; PAL: 625 TV lines, 50 fields/sec. Picture elements: NTSC: 768 (H) x 494 (V); PAL: 752 (H) x 582 (V)
  • Page 8: Major Parts Names And Functions

    Major Parts Names and Functions Dome without audio Dome with audio Please reference page 9 (Adjustment)
  • Page 9 (5) Zoom Ring (1) Camera Cover Loosen the zoom ring knob, then you This cover will protect the camera can adjust the viewing range. Turn from dust and damage. the ring towards <W> for WIDE or <T> for TELE as necessary. When ((2) Lens the setting is finished, tighten the This Vari-Focal Lens allows users to...
  • Page 10: Installation Instructions

    Installation Instructions 1. Remove the plastic dome cover. 2. Lossen the two screws of the supporting bracket to remove the camera body. 3. Using four screws to fix the camera base on the ceiling. 4. Put the camera body back to the supporting bracket, then tighten the two screws to fix the camera.
  • Page 11: Lens Adjustments

    Lens Adjustments Zoom and focus adjustments After the camera was installed, the zoom and focus of the lens must be adjusted. 1. Loosen the zoom ring knob, and then turn the ring towards <W> or <T> as necessary to obtain the desired view range. W side (Zoom out) The viewing range will be wider and the subject is smaller.
  • Page 12: Adjustments

    Adjustments Audio (Optional)
  • Page 13 (1) IRIS ALC Adjustment To select light metering method – Turn the IRIS ALC Adjustment VR counterclockwise for Average Metering. Turn the IRIS ALC Adjustment VR clockwise for Peak Metering. (2) IRIS Level Adjustment Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens.
  • Page 14 (5)Back Light Compensation Adjustment When the background of the subject is very bright and the subject itself is dark, set the BLC (Back Light Compensation) ON. The BLC will measure the light of the image center and the lens iris will automatically set for optimum image quality.
  • Page 15 EverFocus Electronics Corp. Head Office: China Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Room 609, Technology Trade Building, Hsi-Chih, Taipei, Taiwan Shandgdi Information Industry Base, TEL: +886-2-26982334 Haidian District, Beijing,China FAX: +886-2-26982380 TEL: +86-10-62971096 www.everfocus.com.tw FAX: +86-10-62971432 www.everfocus.com.cn USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A.

This manual is also suitable for:

Eq350hq