○
3
Video Stream
○
4
Select the desired Video Stream from Stream 1 / Stream 2, Stream 3 and Stream 4
stream must be enabled in camera Setting menu). Please refer to "Section 4.4.1 Multi
Streaming" for further information.
View Size
○
5
You can select View size to either reduce or enlarge the image to the appropriate view
size.
Select the view size for live images from:
704*480/640*480/352*240/320*240/176*120
Digital Zoom
○
6
Press "+" or "-" button to magnify / reduce the displayed image. (max. is X10)
Clicking on a magnified image will re-center the image around that point.
Record
○
7
The record button is used to record the current video stream. The location where the
image file is saved can be specified in Setting -> User Config. Please refer to "Section
4.2 User Config" for further information.
Note: Record segment is limited to 1-10 min. If you need to do long recordings,
please use schedule recording. For more details about schedule recording, please see
"Section 4.7 Event".
Snapshot
○
8
The Snapshot button saves a .jpg image of the video image currently being displayed.
The location where the snapshot data is saved can be specified in Setting -> User's
Config. Please refer to "Section 4.2 User Config" for further information.
Press button to close the EQN2200 network page.
10
EQN2200