Table of Contents
Advertisement
Set Date/Time Manually
Date: Click the calendar and pick the date. Press << to go previous year, < to go
previous month, > to go next month and >> to go next year.
Time: Click on Hour, Minute, Seconds, am/pm; then use up arrow to increase
value and down arrow to decrease value.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Set Date/Time Sync.
Check Enable NTP checkbox to enable NTP server.
NTP server: Time automatically adjusted by synchronizing with NTP server will
be used as the standard time for the camera.
Sync. Internal: Select an interval (1 - 24 hours: in 1 hour intervals) to elapse
between synchronizations with the NTP server.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
37
EQN2200
Advertisement
Table of Contents
