SMC Networks TigerSwitch 100 Management Manual page 67

500-262143
packets per second; Default: 500 packets per second)
• Broadcast Control Status – Shows whether or not broadcast storm control
has been enabled. (Default: Enabled)
Web – Click Port, Port Broadcast Control. Set the threshold for all ports,
and then click Apply.
CLI – Specify the required interface, and then enter the threshold. The
following sets broadcast suppression at 128 packets per second on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport broadcast packet-rate 128
Console(config-if)#
P C
ORT ONFIGURATION
3-85
3-92
2-37