SMC Networks TigerSwitch 100 Management Manual page 110

C
ONFIGURING THE
• Traffic Class – Output queue buffer. (Range: 0 - 3, where 3 is the
highest CoS priority queue)
Web – Click Priority, Traffic Classes. Assign priorities to the output
queues, then click Apply.
CLI – The following example shows how to map CoS values 0, 1 and 2 to
CoS priority queue 0, value 3 to CoS priority queue 1, values 4 and 5 to
CoS priority queue 2, and values 6 and 7 to CoS priority queue 3.
Console(config)#interface ethernet 1/1
Console(config)#queue cos-map 0 0 1 2
Console(config)#queue cos-map 1 3
Console(config)#queue cos-map 2 4 5
Console(config)#queue cos-map 3 6 7
Console(config)#exit
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Queue ID Traffic class
-------- -------------
0
1
2
3
Console#
2-80
S
WITCH
0 1 2
3
4 5
6 7
3-85
3-153
3-155