SMC Networks TigerSwitch 100 Management Manual page 170

C L
OMMAND INE
Command
show ip ssh
show ssh
Event Logging Commands
logging on
logging history
logging host
logging facility
logging trap
clear logging
show logging
System Status Commands
show
startup-config
show
running-config
show system
show users
show version
3-26
I
NTERFACE
Function
Displays the status of the SSH server and the
configured values for authentication timeout
and retries
Displays the status of current SSH sessions
Controls logging of error messages
Limits syslog messages sent to the SNMP
network management station based on
severity
Adds a syslog server host IP address that will
receive logging messages
Sets the facility type for remote logging of
syslog messages
Limits syslog messages saved to a remote
server based on severity
Clears messages from the logging buffer
Displays the state of logging
Displays the contents of the configuration file
(stored in Flash memory) that is used to start
up the system
Displays the configuration data currently in
use
Displays system information
Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet client
Displays version information for the system
Mode Page
PE
3-37
PE
3-37
GC 3-38
GC 3-39
GC 3-40
GC 3-41
GC 3-42
PE 3-43
PE 3-43
PE 3-44
PE 3-46
NE, 3-47
PE
NE, 3-48
PE
NE, 3-49
PE