SMC Networks TigerSwitch 100 Management Manual page 36

C
ONFIGURING THE
Menu
Port Security Action
Port Security Status
Address Table
Static Addresses
Dynamic Addresses
Address Aging
Spanning Tree
STP Information
STP Configuration
STP Port Information Configures individual port settings for STP
STP Trunk
Information
STP Port
Configuration
STP Trunk
Configuration
VLAN
VLAN Basic
Information
VLAN Current Table Shows the current port members of each VLAN
VLAN Static List
VLAN Static Table
VLAN Static
Membership by Port
VLAN Port
Configuration
VLAN Trunk
Configuration
2-6
S
WITCH
Description
Configures the port intrusion action globally for
the switch
Enables port security on specified ports
Displays entries for interface, address or VLAN
Displays or edits static entries in the Address
Table
Sets timeout for dynamically learned entries
Displays STP values used for the bridge
Configures global bridge settings for STP
Configures individual trunk settings for STP
Configures individual port settings for STP
Configures individual trunk settings for STP
Displays basic information on the VLAN type
supported by this switch
and whether or not the port supports VLAN
tagging
Used to create or remove VLAN groups
Modifies the settings for an existing VLAN
Configures membership type for interfaces
including tagged and untagged
Specifies default PVID and VLAN attributes
Specifies default trunk VID and VLAN
attributes
Page
2-40
2-40
2-41
2-42
2-44
2-46
2-50
2-54
2-54
2-58
2-58
2-65
2-66
2-68
2-70
2-72
2-73
2-73