Flash/File Commands; Copy - SMC Networks TigerSwitch 100 Management Manual

C L
OMMAND INE
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
Console#quit
Press ENTER to start session
User Access Verification
Username:

Flash/File Commands

These commands are used to manage system code and configuration files.
Command

copy

delete
dir
whichboot
boot system
copy
Use this command to move (upload/download) a code image or
configuration file between the switch's Flash memory and a TFTP server.
When you save the system code or configuration settings to a file on a
TFTP server, that file can later be downloaded to the switch to restore
3-18
I
NTERFACE
Function
Copies a code image or a switch configuration
to or from Flash memory or a TFTP server
Deletes a file or code image
Displays a list of files in Flash memory
Displays the files booted
Specifies the file or image used to start up the
system
Mode Page
PE 3-18
PE 3-21
PE 3-22
PE 3-23
GC 3-24