SMC Networks TigerSwitch 100 Management Manual page 320

U F
PGRADING IRMWARE VIA THE
Select>
Xmodem Receiving Start ::
Image downloaded to buffer.
Update Image File:r
Diagnostic Image Filename : r_20019
Updating file system.
File system updated.
[Press any key to continue]
12. To set the new downloaded file as the startup file, use the [S]et
Startup File menu option.
13. When you have finished downloading code files, use the [C]hange
Baudrate menu option to change the baud rate of the switch's serial
connection back to 9600 baud.
14. Set your PC's terminal emulation software baud rate back to 9600
baud. Press <Enter> to reset communications with the switch.
15. Press <Q> to quit the firmware-download mode and boot the switch.
B-4
S
ERIAL
[R]untime
[D]iagnostic
[L]oader (Warning: you sure what you are doing?)
P
ORT