SMC Networks TigerSwitch 100 Management Manual page 42

C
ONFIGURING THE
Manual Configuration
Web – Click System, IP. Specify the management interface, IP address and
default gateway, then click Apply.
CLI – Specify the management interface, IP address and default gateway.
Console#config
Console(config)#interface vlan 1
Console(config-if)#ip address 10.2.13.30 255.255.255.0
Console(config-if)#exit
Console(config)#ip default-gateway 192.168.1.254
Console(config)#
Using DHCP/BOOTP
If your network provides DHCP/BOOTP services, you can configure the
switch to be dynamically configured by these services.
Web – Click System/IP. Specify the Management VLAN, set the IP
Address Mode to DHCP or BOOTP. Then click "Apply" to save your
changes. The switch will broadcast a request for IP configuration settings
on the next power reset. Otherwise, you can click "Restart DHCP" to
immediately request a new address.
2-12
S
WITCH
3-85
3-67
3-70